The HemoCue® WBC System
Determine White Blood Cell Counts
Based on HemoCue’s proven, reliable microcuvette technology, the HemoCue® WBC System brings you the unique benefit of determining total white blood cell counts right at the point-of-care. In just three minutes, you have results with the same quality as those from a central laboratory.
- Lab-quality results within 3 minutes
- CLIA Moderately Complex point-of-care device
- Capillary or venous samples
Accuracy for Confident Decisions:
- Factory calibration with no further calibration needed
- Built-in self-test
- Blood-based liquid controls available
Three Simple Steps:
Accurate White Blood Cell Counts When You Need Them:
Single replicate on the HemoCue® WBC System and the mean of duplicate on the comparative method are presented in the plots. Validation studies are performed according to the CLSI Document EP9-A2.1
Each point on the diagram represents an actual HemoCue® WBC System test result. The closer to the line, the more closely related the result is to the comparative method.
HemoCue® WBC System
|Principle||Imaging system characterizing white cells that are stained and counted|
|Calibration||Factory calibrated; needs no further calibration|
|Sample Material||Capillary or venous (EDTA) whole blood|
|Sample Volume||~10 µL|
|Measuring Time||within 3 minutes|
|Measurement Range||0.3-30.0 × 109/L (300-30000/mm3, 300-30000/μL)|
|Device||Dimensions||7.05×5.24×4.76 in (179×133×121 mm)|
|Weight||1.32 lbs. (600 g), with batteries installed|
|Temp Ranges||Analyzer Storage||32-122°F (0-50°C)|
<90% non-condensing humidity; short-term storage (four weeks, unopened) 32-122 °F (0-50 °C), <90% non-condensing humidity; three-month open vial stability
|Analyzer Operation||59-95°F (15-35°C)|
|Quality Control||Built-in self-test; three levels of liquid controls available|
|Batteries||6 AA batteries|
|Interface||Printer and PC|
|Prop 65 Warning||Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov|
* Refer to your local or regulatory agency for any external control requirements.
1 HemoCue® WBC System Operating Manual 903001 190129
Answers Right When you Need Them
Immediate WBC counts can mean the difference between waiting and taking action at the point-of-care. The HemoCue® WBC System helps you move from assessment to treatment within minutes rather than hours or days.
HemoCue® WBC System
160 HemoCue® Hb WBC System microcuvettes. See storage and expiration details in the system specifications section above. Only for use with the HemoCue® Hb WBC System.
Product Item: 113003
HemoCue® Cleaner Plus
Set of 5 individually packaged cleaners. Constructed of polyurethane foam sponge, covered by microfiber fabric and pre-saturated with a cleaning solution. Designed for cleaning the optronic unit of the HemoCue® WBC Analyzer.
Product Item: 139130
4x4 inches. Non-woven material, cost-effective to traditional cotton gauze. Superior absorption capacity, low fiber release. Highly absorbent so you need fewer swabs and sponges.
Product Item: 139141
Made of puncture-resistant polypropylene to meet or exceed industry standards Horizontal drops allow full utilization of capacity to the fill-line. Translucent lid for quick visual identification of fill level. Locking lid allows safe transport. 1 qt. capacity. Do not reuse.
Product Item: 586904
Box of 100 sterile safety lancets. 1.8mm incision ideal for infants and children. Optimizes sampling technique and increases the chance of obtaining a correct sample value.
Product Item: SLN200
Box of 100 sterile safety lancets. 2.2mm incision optimizes sampling technique and increases the chance of obtaining a correct sample value.
Product Item: SLN240
Box of 200 sterile safety lancets. 2.25mm incision optimizes sampling technique and increases the chance of obtaining a correct sample value.
Product Item: 130148
Box of 100 sterile safety lancets. 2.8mm incision ideal for finger and heel target areas. Optimizes sampling technique and increases the chance of obtaining a correct sample value.
Product Item: SLN300
HemoCue® WBC System
R&D HC WBC Control -
Product Item: WBC00S
HemoCue® WBC System
The Martel® printer can be used to print results from the HemoCue® Hb 201+ Analyzer, HemoCue® Hb 301 Analyzer, HemoCue® WBC Analyzer and HemoCue® Albumin 201 Analyzer. Comes with power adapter, four (4) rechargeable NiMH AA batteries, connection cable and instructions for use.
Product Item: 130662
AC Power Adapter
AC Adapter; U.S. Standard. Works with all HemoCue devices except DM models and HemoCue® Hb 801 System.
Product Item: HCADAPT
Service and Support That Won’t Slow You Down.
Only from HemoCue.
From everyday questions to optimizing your HemoCue experience, we aim to provide the best support at every turn. We support every product we offer, and no one knows our products better than the HemoCue OnCue Support experts. One call is all it takes to get answers fast—no getting bounced around and no empty promises. That’s our commitment to you.
- Live customer service and technical support located at HemoCue America in California
Extensive in-field and virtual support from your HemoCue representative
Comprehensive online education programs and competency reviews
Additional HemoCue Systems:
HemoCue point-of-care hematology tests provide rapid lab-quality patient hemoglobin levels and white blood cell count, so you can go from assessment to treatment in minutes. Designed with our proven, reliable microcuvette technology, our hematology systems enable easy access to lab-quality results with minimal training and maintenance.
Select a Hematology System to learn more about it:
HemoCue is proud to be the U.S. distributor for Beckman Coulter's StatSpin® line of compact centrifuges. Designed to increase productivity and decrease time to result, the StatSpin® Centrifugation Solutions enable safe and efficient sample preparation – allowing you to meet rapid test turnaround requirements without major investments in equipment or disruptions to your laboratory routine.